|
Vergalhões de 9,52 mm de diâmetro da liga 6201 do sistema Al-Mg-Si, produzidos através do sistema de laminação Properzi, foram solubilizados em temperaturas de 450oC, 480oC, 520oC, 550oC e 580oC por um período de 40 minutos e envelhecidos naturalmente em temperatura ambiente, por até 12 meses. Foram feitos ensaios de tração, microdureza Vickers, ensaios de condutividade elétrica, micrografias MEV e ótica nas amostras envelhecidas naturalmente e nas amostras envelhecidas naturalmente e precipitadas artificialmente por um período de 2 horas a 170oC. Foi verificada a evolução do Limite de Resistência à Tração, Limite de Escoamento, Alongamento, Coeficiente de Encruamento (n), Microdureza Vickers, Condutividade Elétrica, antes e após a precipitação artificial nas amostras envelhecidas naturalmente por um período de 12 meses. O objetivo é verificar qual temperatura de solubilização proporciona as melhores propriedades mecânicas e elétricas para a produção de cabos elétricos, por um período de envelhecimento mais longo possível, visando aumentar o tempo de estocagem desta liga após solubilização. Os resultados mostraram que a melhor situação ocorre com uma temperatura de solubilização de 520oC, por um período máximo de 60 dias. |
|
Rods of 9.52 mm of diameter of the alloy 6201 of the system Al-Mg-Si, was produced from a Properzi rolling mill system, it was solubilizated in temperatures of 450oC, 480oC, 520oC, 550oC e 580oC for 40 minutes and naturally aged for until 12 months. It was done tensile tests, Vickers microhardness measurements, electrical conductivity, micrographys from MEV and optical in the samples naturally aged and in the samples naturally aged and artificially precipitated for 2 hours at 170oC. It was verified the evolution of the ultimate tensile, flow tensile, elongation, stress coefficient (n), microhardness and electrical conductive, before and after the artificial precipitation in the samples naturally aged for 12 months. The aim is verify which temperature of solubilization gives the best mechanical and electrical properties for electrical cables production, for the longest period of naturally aging, in order to increase the shelf life of this alloy after the solubilization treatment. The results showed that the best situation happens with a temperature of solubilization of 520oC for a maximum period of 60 days. |